Submissions from 2012
Analysis of test parameters and criteria for characterizing and comparing puncture resistance of protective gloves to needles, C. Gauvin, O. Darveau, C. Robin, and J. Lara
La genèse d'un utilitaire pour favoriser l'utilisation des savoirs et leurs impacts en SST, L. Giraud, M.-F. d'Amours, B. Aucourt, D. Drolet, P.-A. Dubé, S. Jocelyn, and P.-A. Moulet
L'enseignement des situations d'interaction entre des problèmes de santé et de sécurité au travail et de gestion des ressources humaines, S. Gravel, J. Dubé, M. Lortie, and H. Bilodeau
Transfert des connaissances sur les bonnes pratiques de santé et de sécurité au travail dans les petites entreprises montréalaises embauchant des travailleurs immigrants, S. Gravel, G. Legendre, and J. Rhéaume
L'implantation de l'approche relationnelle de soins visant à améliorer la SST des soignants en CHSLD: point de vue des différents acteurs clés impliqués, A.-C. Guyon, L. Trudel, M. Bellemare, A. Viau-Guay, and J. Desrosiers
Les effets négatifs potentiels du cumul études-travail: intervenir au-delà du simple nombre d'heures hebdomadaires travaillées, L. Laberge and P. Lévesque
Issues related to climate change impacts in the workplace, F. Labrèche, A. Smargiassi, A. Adam-Poupart, P. Duguay, M.-A. Busque, and J. Zayed
3D reconstruction of the scapula from biplanar radiographs, P. Y. Lagacé, T. Cresson, N. Hagemeister, F. Billuart, X. Ohl, J. de Guise, and W. Skalli
Criterion validity and between-day reliability of an inertial sensor-based trunk postural stability test during unstable sitting, C. Larivière, H. Mecheri, and D. Gagnon
Description de la variabilité de l'activité de transfert des bénéficiaires chez les techniciens ambulanciers paramédics, D. Larouche, M. Authier, S. Hegg-Deloye, J. Prairie, and P. Corbeil
Estimation des coûts des lésions professionnelles : une étude de faisabilité dans le secteur minier, M. Lebeau, P. Duguay, and A. Boucher
The costs of occupational injuries and diseases in Quebec, 2005-2007, M. Lebeau, P. Duguay, and A. Boucher
A guideline for occupational health and safety considerations in facility planning, A. Moatari, B. Agard, and Y. Chinniah
Influence de l'état d'agglomération sur la toxicité pulmonaire des nanoparticules de TiO2, A. Noël, K. Maghni, Y. Cloutier, C. Dion, R. Tardif, and G. Truchon
Rats pulmonary effects to acute inhalation of 5 nm TiO2 showing two distinct agglomeration states, A. Noël, K. Maghni, Y. Cloutier, C. Dion, K. V. Wilkinson, S. Hallé, R. Tardif, and G. Truchon
Risk management of nanoparticles in the workplace, C. Ostiguy
Description des conditions de travail et d'emploi, P. Prud'homme, E. Cloutier, and P. Duguay
Acoustic finite element modeling of hearing protection devices, F. Sgard, M. Brummund, G. Viallet, S. Boyer, Y. Petit, F. Laville, and J. Boutin
La polyvalence : une forme d'organisation aux multiples enjeux, M. St-Vincent, D. Denis, D. Imbeau, M. Gonella, B. Farbos, and D. Morel
Assessing mental workload in the return-to-work process: A question of perspective, V. Tremblay-Boudreault and M.-J. Durand
Development of a new questionnaire to assess mental workload in the return-to-work process, V. Tremblay-Boudreault and M.-J. Durand
Burr size minimization when drilling 6061-t6 aluminum alloy, Y. Zedan, A. Djebara, V. Songmene, and S. A. Niknam
Submissions from 2011
Efficient hybrid FE-TMM modeling of the vibroacoustic response of structures with attached sound packages, L. Alimonti, N. Atalla, A. Berry, and F. Sgard
Conception d'un outil d'observation et de suivi de procédures de cadenassage en milieu industriel, D. Burlet-Vienney, Y. Chinniah, E.-K. Boukas, A. Pizarro-Chong, and M. El-Aboudi
L'ergonomie face au double enjeu de la sécurité des patients et des professionnels de la santé en pédiatrie, A. Cibotaru, M. Lortie, and I. Nastasia
Characterization of the resistance of protective gloves to pointed blades, P. I. Dolez, M. Azaiez, and T. Vu-Khanh
The influence of abdominal oblique modelling on predicted muscle forces and lumbar spine loads, D. Gagnon, N. Arjmand, A. Plamondon, A. Shirazi-Adl, and C. Larivière
A new test method to characterize the grip of protective glove materials, C. Gauvin, J. Lara, S. Proulx-Croteau, and P. Dolez
Towards real-time simulation of construction activities considering spatio-temporal resolution requirements for improving safety and productivity, A. Hammad and C. Zhang
Les caractéristiques cliniques des travailleurs souffrant d'état de stress postraumatique, S. Lacerte, A. Marchand, and S. Guay
Anchoring system for guardrails on flat roofs for roofers, A. Lan
The weight of evidence approach in the assessment of hearing impairment induced by noise and ototoxic chemicals, T. Leroux, A. Vyskocil, G. Truchon, F. Lemay, F. Gagnon, M. Gendron, A. Boudjerida, N. El-Majidi, and C. Viau
Bilan réflexif d'études menées dans des secteurs combinant des problématiques de santé, de sécurité pour le travail et pour le système, M. Lortie, I. Nastasia, and S. Gravel
Psychodynamique du travail d'une école d'un milieu socioéconomique défavorisé : des interactions complexes entre les enseignants et le personnel scolaire, M.-F. Maranda and S. Viviers
Comparison of different vehicle backup-alarm types with regards to worker safety, H. Nélisse, C. Laroche, C. Giguère, J. Boutin, V. Vaillancourt, and P. Laferrière
Gestion des risques reliés au transport de matières dangereuses au Québec: un outil d'aide à la décision pour le choix des transporteurs, I. Peignier and N. De Marcellis-Warin
Risk related to the transportation of hazardous materials: A decision-making tool for selecting a carrier, I. Peignier and N. De Marcellis-Warin
Portrait des pratiques organisationnelles de sécurité des transporteurs routiers de matières dangereuses au Québec, I. Peignier, N. De Marcellis-Warin, and M. Trépanier
CFD approaches to predicting dilution from exhaust stacks in urban areas, T. Stathopoulos, M. Chavez, and A. Bahloul
L'inspection du travail au Québec : parfois un levier pour la prévention des TMS, M. St-Vincent
Approche ergonomique des risques psychosociaux associés aux TMS: l'étude de la charge émotionnelle des préposés au service d'urgence de la sécurité publique, G. Toulouse, L. St-Arnaud, D. Duhalde, A.-S. Comtois, and A. Delisle
Multi-agent-based approach for real-time collision avoidance and path re-planning on construction sites, C. Zhang, A. Hammad, and J. Bentahar
Submissions from 2010
Sound radiation of orthotropic curved sandwich structures using a mixed boundary element/finite element approach, K. Amichi, N. Atalla, and F. Sgard
Two trunk biomechanical models estimate quite different muscle forces and spine loads, N. Arjmand, D. Gagnon, A. Plamondon, A. Shirazi-Adl, and C. Larivière
Faciliter l'apprentissage des caristes quant aux concepts de stabilité des chariots élévateurs : défis, nouvelle approche et adaptation, S. Beaugrand, D. Denis, C. Larue, and H. Boudreault
Les lésions professionnelles indemnisées référées en réadaptation : portrait statistique de la situation au Québec en 2005-2007, A. Boucher and P. Duguay
OSH policy, politics and structures in Québec: Effects on interventions in Québec, D. Champoux, A. Beauvais, and R. Baril
Cultural issues in disability prevention, rehabilitation and return-to-work process, D. Côté
Psychological distress among government employees: A mixed approach, M.-F. Coutu, M. J. Durand, M. Corbière, I. Nastasia, P. Lemieux, and P. Loisel
Prédiction in silico de valeurs limites d'exposition pour les solvants organiques, M. Debia and K. Krishnan
A comparison between single- and multi-joint emg-assisted by optimization lumbar spine models, D. Gagnon, N. Arjmand, A. Plamondon, A. Shirazi-Adl, and C. Larivière
Vibration of portable orbital sanders and its impact on the development of work-related musculoskeletal disorders in the furniture industry, F. Gauthier, D. Gélinas, and P. Marcotte
La résilience des entreprises face aux dilemmes de gestion des problèmes de santé et de sécurité au travail ayant une incidence sur la gestion des ressources humaines, S. Gravel, M. Lortie, and H. Bilodeau
Strategies to develop occupational health and safety measures in small businesses employing immigrant workers in Montreal, S. Gravel and J. Rhéaume
Theoretical evaluation of methods for the qualitative estimation of risk, N. Healy, N. Stacey, F. Gauthier, and Y. Chinniah
Performance analysis of a relative motion based magneto-rheological damper controller for suspension seats, X. Huang and S. Rakheja
Mesothelioma surveillance: Validation of diagnoses from a cancer registry, F. Labrèche, G. Ostiguy, B. Case, J. Chalaoui, J. Siemiatycki, and J. Camus
Effect of pain attention/distraction and pain-related psychological variables on neuromuscular responses during rapid arm flexion movements, C. Larivière, H. Butler, M. J. L. Sullivan, J. Fung, and R. Vadeboncoeur
Back muscles specificity of roman chair endurance exercises, C. Larivière, R. A. da Silva, B. Arsenault, S. Nadeau, and A. Plamondon
Enhancing stakeholders involvement in knowledge translation activities in the OHS research environment, L. Lazure, C. Gagné, and D. Denis
Précarité des trajectoires d'emploi et premières lésions professionnelles chez les jeunes de 16 à 24 ans, É. Ledoux, J.-F. Godin, B. Laplante, M. Vultur, and Z. Tsala Dimbuence
Individual determinants of stability during lifting, B. Lussier, A. Delisle, F. Berrigan, and A. Plamondon
Utilisation du test d'activation des basophiles pour l'identification précoce de la sensibilisation allergique chez les travailleurs exposés à des agents pouvant causer l'asthme professionnel, K. Maghni, L. Castellanos, J. L'Archevêque, H. Ghezzo, J.-L. Malo, and C. Lemière
Apparent mass responses of seated occupants under single and dual (XZ) axis vibration, S. Mandapuram, S. Rakheja, P.-É. Boileau, and S. Maeda
Health and safety preoccupations trough the Quality Clinic Process Chart (QCPC) (Prise en compte de la santé et la sécurité de travailleurs dans le processus de collecte et d’analyse des TCQP), I. Nastasia, D. Imbeau, G. Toulouse, M. St-Vincent, K. Aubry, and M.-E. Chiasson
Analyse de la littérature francophone sur les interventions ergonomiques de type participatives initiées pour la prévention des TMS, M. St-Vincent, N. Vézina, M. Laberge, M. Gonella, and D. Cole
L'expérience de travail des jeunes étudiants du Québec. Une particularité Nord-Américaine, C. Thuilier, É. Ledoux, L. Laberge, and S. Bescou
Towards emg-driven models of muscle-joint systems for clinical applications, J. van Dieën, C. Larivière, D. Gagnon, I. Kingma, and J. Cholewicki
Submissions from 2009
Multiple rationalities in OHS practices of SB actors and intervention experts in Québec, D. Champoux
Effect of policy, politics and structures on intervention for sustainable prevention in small businesses, D. Champoux and J.-P. Brun
The methods used by experienced handlers: can they serve as inspiration in developing the content of handling training?, D. Denis and A. Plamondon
Effect of industrial contaminants on the resistance of protective gloves to mechanical risks, P. Dolez, J.-B. Renaud, T. Vu-Khanh, C. Gauvin, and J. Lara
Health and safety in small workplaces: Refocusing Upstream, J. M. Eakin, D. Champoux, and E. MacEachen
Outil d'analyse des contextes de manutention : utiliser la clé de la formation pour ouvrir la porte sur l'organisation, M. Gonella, M. St-Vincent, D. Lortie, and D. Denis
Improvements to the ISO 13997 cut test method, J. Lara, C. Gauvin, and D. Robinson
Poor back muscle endurance is mediated by pain catastrophizing in chronic low back pain patients, C. Larivière, M. Bilodeau, R. Forget, and R. Vadeboncoeur
Mechanism to link two inertial measurement units to a potentiometer: Improvements of measurements between pelvis and trunk motion, C. Larue, P. Desjardins, A. Plamondon, and A. Delisle
Respiratory protection against bioaerosols in dentistry settings, J. Lavoie
Stratégies observées pour réduire les contraintes aux membres supérieurs chez les travailleurs des Services à l'automobile, D. Marchand, D. Giguère, and A. Rouleau
Daytime sleepiness and natural light exposure in students who work during the school year: Preliminary results, J.-S. Martin, M. Hébert, É. Ledoux, and L. Laberge
Generation and characterization of TiO2 nano-aerosols of different agglomeration states, A. Noël, Y. Cloutier, C. Dion, R. Tardif, and G. Truchon
Toxicokinetic modeling to assess the impact of workload on exposure indicators of toluene and n-hexane, I. Sari-Minodier, G. Truchon, G. Charest-Tardif, A. Bérubé, and R. Tardif
Are there health effects of sexual harassment in the workplace? A study of the relationships between unwanted sexual attention and neck pain and low back pain, S. Stock, F. Tissot, and K. Messing
Occupational ototoxicity of ethyl benzene, A. Vyskocil, T. Leroux, G. Truchon, F. Lemay, F. Gagnon, N. El Majidi, and C. Viau
Submissions from 2008
Posture effect on vibration transmissibility of the hand-arm, S. A. Adewusi, S. Rakheja, P. Marcotte, and P.-É. Boileau
Amélioration de la prise de décisions concernant l’application de la loi et de l’assurance de la conformité par l’analyse des produits dangereux en milieu de travail, S. Aubin, S. Maloz, L. El Bilali, M. Nicholas, and J. Lesage
Noise as an explanatory factor in work-related fatality reports: A descriptive study, P. Deshaies, R. Martin, D. Belzile, P. Fortier, C. Laroche, S.-A. Girard, T. Leroux, H. Nélisse, R. Arcand, M. Poulin, and M. Picard
The nature of multiaxis six-degree-of-freedom vehicle vibrations in forestry, mining and construction heavy equipment, J. P. Dickey, T. Eger, M. Oliver, P.-É. Boileau, and S. Grenier
Changes in seat-head whole-body vibration transmissibility and muscle activity under assymetric neck and trunk postures, T. Eger, J. P. Dickey, P.-É. Boileau, and J. Stevenson
On the use of EMG amplitude ratios to assess the coordination of back muscles, C. Larivière and B. Arsenault
Characterization of the noise and vibration produced by portable power tools used in the automotive repair industry, P. Marcotte, R. Oddo, J. Boutin, and H. Nélisse
Defining reference values of vertical apparent mass of a seated body exposed to vibration, S. Patra, S. Rakheja, P.-É. Boileau, H. Nélisse, and J. Boutin
Experimental reproducibility investigation on physical and acoustical characterization of porous media, F. Pompoli, P. Bonfiglio, N. Prodi, K. Horoshenkov, A. Khan, F. X. Bécot, L. Jaouen, E. Gourdon, and F. Sgard
Analysis of distributed responses of the seated human body exposed to vertical seat excitations, A. Pranesh, S. Rakheja, and R. Demont
Beware! Slippery floor: An interactive game to improve floor cleaning and prevent slips and falls in the food industry, F. Quirion, F. Amyot, and B. Bionet
Exploring the human grip force system: A preliminary study, A. Villasenor-Herrera, S. De Serres, R. Wagner, and R. E. Kearney
Human grip force response: An input-output approach, A. Villasenor-Herrera, R. E. Kearney, R. Wagner, and S. De Serres
Experimental characterization of the influence of curing under stress on the hydromechanical and geochemical properties of cemented paste backfill, E. Yilmaz, T. Belem, M. Benzaazoua, and B. Bussière